Lower Mainland, BC

Retaining walls in Burnaby, BC.

Burnaby Mountain and Capitol Hill give this city some of the most dramatic residential grades in Metro Vancouver, and as a retaining wall contractor in Burnaby we tackle some of our most technically demanding engineered wall projects here. The steep hillsides above the SFU campus and around the Brentwood area have shallow bedrock pockets and unstable fill that make wall engineering a genuine specialty. We work with structural engineers who understand Burnaby's local geology and we build to their stamped designs. Burnaby has a real variety of terrain and the wall approach changes depending on whether you're on the mountain, on Capitol Hill, or in one of the flat valley-bottom neighbourhoods.

Get a free quote

Tell us a bit about your wall. We'll come out, take a look, and send you a no-pressure written quote.

Photos of your wall or slope (optional)

A few pictures helps us quote faster. Up to 6 images, any phone photo works.

We'll reply within one business day. No spam, ever.

Commercial-grade concrete retaining wall on a developer-built site (representative photo for Burnaby)

// Retaining walls in Burnaby

The wall types and finishes we build most around Burnaby Mountain.

What we see in Burnaby

The local stuff that actually matters.

Burnaby Mountain's grades and shallow bedrock pockets often call for a hybrid wall: shorter geogrid runs, a keyed-in footing, and sometimes a drilled anchor where the bedrock comes up.

Most of our calls in Burnaby come from homeowners around Burnaby Mountain and Capitol Hill, plus Brentwood. Whether you're building from scratch or replacing a wall that's leaning, the process is the same: walk the slope with you, check the drainage situation, figure out what's really going on, and give you an honest written quote.

Burnaby's older residential areas, particularly the pre-war homes on Capitol Hill, often have aging concrete block retaining walls that look solid from the street but are holding water internally. We do a free site visit and we'll show you exactly what we're seeing: whether the drain tile is blocked, whether the wall has moved, and what the best remedy is. Often a drain tile cleanout and crack seal will extend the wall's life significantly before a full rebuild is needed. We'll give you the honest answer either way.

Free site visit in Burnaby

Burnaby at a glance

  • Burnaby Mountain, Capitol Hill, Brentwood
  • Burnaby Mountain's grades and shallow bedrock pockets often call for a hybrid wall: shorter geogrid runs, a keyed-in footing, and sometimes a drilled anchor where the bedrock comes up.

Why hire a local contractor?

We pull permits directly with the local municipality, know the soil conditions, and don't pad quotes with daily equipment rental costs. Free on-site visit, written scope, no surprises.

Services in Burnaby

Everything we build in Burnaby.

Common questions

Questions from Burnaby homeowners.

  • Yes, if your wall is over 1.2 metres (about 4 feet) tall. The City of Surrey requires an engineered design and a building permit for anything taller. Walls under 1.2 metres usually don't need a permit, but if your wall supports a driveway, a building, or sits near the property line, the city may still want to see drawings. We handle the whole permit process for you.

Nearby areas

We also build walls in...

// Ready when you are

Tell us about the slope. We'll come look.

Free on-site visit anywhere in Surrey, White Rock, Langley, Burnaby, Richmond, Vancouver, or anywhere across the Lower Mainland. Honest assessment, written quote, no pressure.

Call nowText us